mur1510, mur1515, MUR1520, mur1540, mur1560 power rectifiers these state?of?the?art devices are a series designed for use in switching power supplies, inverters and as free wheeling diodes. features ? ultrafast 35 and 60 nanosecond recovery time ? 175 c operating junction temperature ? popular t o?220 package ? high voltage capability to 600 v ? low forward drop ? low leakage specified @ 150 c case temperature ? current derating specified @ both case and ambient temperatures ? pb?free packages are available* mechanical characteristics: ? case: epoxy, molded ? weight: 1.9 grams (approximately) ? finish: all external surfaces corrosion resistant and terminal leads are readily solderable ? lead temperature for soldering purposes: 260 c max. for 10 seconds ultrafast rectifiers 15 amperes, 100?600 volts 1 3 4 to?220ac case 221b plastic 4 3 1 marking diagram a = assembly location y = year ww = work week g = pb?free package u15xx = device code xx = 10, 15, 20, 40 or 60 ka = diode polarity ay wwg u15xx ka http://www.kersemi.com
mur1510, mur1515, MUR1520, mur1540, mur1560 http://kersemi.com 2 maximum ratings rating symbol mur unit 1510 1515 1520 1540 1560 peak repetitive reverse voltage working peak reverse voltage dc blocking voltage v rrm v rwm v r 100 150 200 400 600 v average rectified forward current (rated v r ) i f(av) 15 @ t c = 150 c 15 @ t c = 145 c a peak rectified forward current (rated v r , square wave, 20 khz) i frm 30 @ t c = 150 c 30 @ t c = 145 c a nonrepetitive peak surge current (surge applied at rated load conditions halfwave, single phase, 60 hz) i fsm 200 150 a operating junction temperature and storage temperature range t j , t stg ?65 to +175 c maximum ratings are those values beyond which device damage can occur. maximum ratings applied to the device are individual str ess limit values (not normal operating conditions) and are not valid simultaneously. if these limits are exceeded, device functional operation i s not implied, damage may occur and reliability may be affected. thermal characteristics parameter symbol value unit maximum thermal resistance, junction?to?case r jc 1.5 c/w electrical characteristics characteristic symbol 1520 1540 1560 unit maximum instantaneous forward voltage (note 1) (i f = 15 a, t c = 150 c) (i f = 15 a, t c = 25 c) v f 0.85 1.05 1.12 1.25 1.20 1.50 v maximum instantaneous reverse current (note 1) (rated dc voltage, t c = 150 c) (rated dc voltage, t c = 25 c) i r 500 10 500 10 1000 10 a maximum reverse recovery time (i f = 1.0 a, di/dt = 50 a/ s) t rr 35 60 ns
mur1510, mur1515, MUR1520, mur1540, mur1560 http://kersemi.com 3 mur1510, mur1515, MUR1520 figure 1. typical forward voltage v f, instantaneous voltage (volts) 0.2 0.8 0.6 1.0 30 0.1 0.3 0.2 2.0 1.0 100 20 7.0 3.0 0.5 5.0 50 , instantaneous forward current (amps) f v r , reverse voltage (volts) 060 40 100 120 0.1 0.05 0.02 10 5 2 50 20 100 t j = 150 c i r 20 80 200 figure 2. typical reverse current t a , ambient temperature ( c) 020 2.0 4.0 i f(av) 0 6.0 8.0 10 12 14 40 60 100 120 140 160 200 t c , case temperature ( c) 140 150 0 4.0 2.0 6.0 10 8.0 14 12 i 180 figure 3. current derating, case figure 4. current derating, ambient 0 4.0 2.0 4.0 6.0 8.0 0 8.0 12 16 i f(av) , average forward current (amps) p f(av) figure 5. power dissipation 0.7 10 70 1.2 1.6 1.4 100 c 25 c 160 180 140 1 0.5 0.2 , reverse current ( a) 100 c 25 c 160 170 16 , average power dissipation (watts) square wave dc , average forward current (amps) t j = 125 c i 2.0 6.0 10 14 10 12 14 16 rated voltage applied , average forward current (amps) f(av) square wave dc 0.4 r ja = t j = 150 c 0.01 i pk i av dc square wave 20 10 (capacitive load) =5.0 80 180 square wave dc as obtained in free air, no heat sink r ja = 60 c/w 16 c/w as obtained from a small to?220 heatsink i pk i av (resistive load) =
mur1510, mur1515, MUR1520, mur1540, mur1560 http://kersemi.com 4 mur1540 figure 6. typical forward voltage v f, instantaneous voltage (volts) 0.2 0.8 0.6 1.0 30 0.1 0.3 0.2 2.0 1.0 100 20 7.0 3.0 0.5 5.0 50 , instantaneous forward current (amps) f v r , reverse voltage (volts) 0 150 100 250 300 0.1 0.05 0.02 10 5 2 50 20 100 t j = 150 c i r 50 200 500 figure 7. typical reverse current t a , ambient temperature ( c) i f(av) t c , case temperature ( c) 140 150 0 4.0 2.0 6.0 10 8.0 14 12 i 180 figure 8. current derating, case figure 9. current derating, ambient i f(av) , average forward current (amps) p f(av) figure 10. power dissipation 0.7 10 70 1.2 1.6 1.4 100 c t j = 150 c 25 c 400 450 350 1 0.5 0.2 , reverse current ( a) 100 c 25 c 160 170 16 , average power dissipation (watts) , average forward current (amps) i rated voltage applied , average forward current (amps) f(av) square wave dc 0.4 0.01 020 2.0 4.0 0 6.0 8.0 10 12 14 40 60 100 120 140 160 200 0 4.0 2.0 4.0 6.0 8.0 0 8.0 12 16 square wave dc t j = 125 c 2.0 6.0 10 14 10 12 14 16 r ja = i pk i av dc square wave 20 10 (capacitive load) =5.0 80 180 square wave dc as obtained in free air, no heat sink r ja = 60 c/w 16 c/w as obtained from a small to?220 heatsink i pk i av (resistive load) =
mur1510, mur1515, MUR1520, mur1540, mur1560 http://kersemi.com 5 mur1560 figure 11. typical forward voltage v f, instantaneous voltage (volts) 0.2 0.8 0.6 1.0 30 0.1 0.3 0.2 2.0 1.0 100 20 7.0 3.0 0.5 5.0 50 , instantaneous forward current (amps) f v r , reverse voltage (volts) 150 300 250 400 450 0.1 0.05 0.02 10 5 2 50 20 100 t j = 150 c i r 200 350 650 figure 12. typical reverse current t a , ambient temperature ( c) i f(av) t c , case temperature ( c) 140 150 0 4.0 2.0 6.0 10 8.0 14 12 i 180 figure 13. current derating, case figure 14. current derating, ambient i f(av) , average forward current (amps) p f(av) figure 15. power dissipation 0.7 10 70 1.2 1.6 1.4 100 c t j = 150 c 25 c 550 600 500 1 0.5 0.2 , reverse current ( a) 100 c 25 c 160 170 16 , average power dissipation (watts) , average forward current (amps) i rated voltage applied , average forward current (amps) f(av) square wave dc 0.4 200 020 2.0 4.0 0 6.0 8.0 10 9.0 7.0 40 60 100 120 140 160 200 0 4.0 2.0 4.0 6.0 8.0 0 8.0 12 16 square wave dc t j = 125 c 2.0 6.0 10 14 10 12 14 16 r ja = i pk i av dc square wave 20 10 (capacitive load) =5.0 80 180 square wave dc as obtained in free air, no heat sink r ja = 60 c/w 16 c/w as obtained from a small to?220 heatsink i pk i av (resistive?inductive load) = 5.0 3.0 1.0
mur1510, mur1515, MUR1520, mur1540, mur1560 http://kersemi.com 6 0.01 0.02 0.05 0.1 0.2 0.5 1.0 0.01 0.02 0.05 0.1 0.2 0.5 1.0 2.0 5.0 10 20 50 100 200 500 1000 t, time (ms) figure 16. thermal response d = 0.5 0.05 single pulse p (pk) t 1 t 2 duty cycle, d = t 1 /t 2 z jc(t) = r(t) r jc r jc = 1.5 c/w max d curves apply for power pulse train shown read time at t 1 t j(pk) ? t c = p (pk) z jc(t) r(t), transient thermal resistance (normalized) 1000 10 20 50 10 100 v r , reverse voltage (volts) figure 17. typical capacitance c, capacitance (pf) 0.1 0.01 100 200 500 1.0 2.0 5.0 20 50 t j = 25 c ordering information device package shipping ? mur1510 to?220 50 units / rail mur1510g to?220 (pb?free) mur1515 to?220 mur1515g to?220 (pb?free) MUR1520 to?220 MUR1520g to?220 (pb?free) mur1540 to?220 mur1540g to?220 (pb?free) mur1560 to?220 mur1560g to?220 (pb?free) ?for information on tape and reel specifications, including part orientation and tape sizes, please refer to our tape and reel packaging specifications brochure, brd8011/d.
mur1510, mur1515, MUR1520, mur1540, mur1560 http://onsemi.com 7 package dimensions to?220 two?lead case 221b?04 issue d b r j d g l h q t u a k c s 4 13 dim min max min max millimeters inches a 0.595 0.620 15.11 15.75 b 0.380 0.405 9.65 10.29 c 0.160 0.190 4.06 4.82 d 0.025 0.035 0.64 0.89 f 0.142 0.147 3.61 3.73 g 0.190 0.210 4.83 5.33 h 0.110 0.130 2.79 3.30 j 0.018 0.025 0.46 0.64 k 0.500 0.562 12.70 14.27 l 0.045 0.060 1.14 1.52 q 0.100 0.120 2.54 3.04 r 0.080 0.110 2.04 2.79 s 0.045 0.055 1.14 1.39 t 0.235 0.255 5.97 6.48 u 0.000 0.050 0.000 1.27 notes: 1. dimensioning and tolerancing per ansi y14.5m, 1982. 2. controlling dimension: inch. f MUR1520/d
|
